dmesg - AArch64 rev 1
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.140-perf (oe-user@oe-host) (gcc version 5.4.0 (GCC) ) #1 SMP PREEMPT Tue Sep 11 20:34:20 JST 2018
Boot CPU: AArch64 Processor [512f2011]
Machine: Qualcomm Technologies, Inc. MSM 8996pro AUTO ADP
Memory limited to 2048MB
Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 48 MiB
Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008ea00000, size 43 MiB
Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 98 MiB
Reserved memory: reserved region for node 'dfps_data_mem@83400000': base 0x0000000083400000, size 0 MiB
Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x0000000083401000, size 35 MiB
Reserved memory: reserved region for node 'cont_splash_mem_hdmi@bdd00000': base 0x00000000bdd00000, size 35 MiB
Reserved memory: reserved region for node 'lk_pool@0x91600000': base 0x0000000091600000, size 6 MiB
Reserved memory: reserved region for node 'early_camera_mem@b3fff000': base 0x00000000b3fff000, size 8 MiB
Reserved memory: reserved region for node 'early_audio_mem@0xb5fff000': base 0x00000000b5fff000, size 3 MiB
Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000ff800000, size 4 MiB
Reserved memory: created CMA memory pool at 0x00000000ff800000, size 4 MiB
Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe400000, size 20 MiB
Reserved memory: created CMA memory pool at 0x00000000fe400000, size 20 MiB
Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8800000, size 92 MiB
Reserved memory: created CMA memory pool at 0x00000000f8800000, size 92 MiB
Reserved memory: initialized node secure_region, compatible id shared-dma-pool
Removed memory: created DMA memory pool at 0x0000000085800000, size 48 MiB
Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
Removed memory: created DMA memory pool at 0x0000000088800000, size 98 MiB
Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool
Removed memory: created DMA memory pool at 0x000000008ea00000, size 43 MiB
Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool
cma: Reserved 16 MiB at 0x00000000f7800000
On node 0 totalpages: 475904
DMA zone: 7436 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 475904 pages, LIFO batch:31
psci: probing for conduit method from DT.
psci: PSCIv1.0 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: Initializing psci_cpu_init
psci: Initializing psci_cpu_init
psci: Initializing psci_cpu_init
PERCPU: Embedded 21 pages/cpu @ffffffc07ff46000 s47512 r8192 d30312 u86016
pcpu-alloc: s47512 r8192 d30312 u86016 alloc=21*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 468468
Kernel command line: lpm_levels.sleep_disabled=1 fpsimd.fpsimd_settings=1 app_setting.use_app_setting=0 app_setting.use_32bit_app_setting_pro=1 console=ttyMSM0,115200,n8 androidboot.console=ttyMSM0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 cma=16M@0-0xffffffff rootwait rootfstype=ext4 root=/dev/mmcblk0p18 fsck.repair=yes firmware_class.path=/firmware/image/ oops=panic maxcpus=3 mem=2048m androidboot.bootdevice=7464900.sdhci androidboot.serialno=939bc642 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_adv7533_720p:1:NONE:cfg:dual_dsi
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 98304 bytes
log_buf_len min size: 131072 bytes
log_buf_len: 262144 bytes
early log buf free: 126280(96%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
software IO TLB [mem 0xf1200000-0xf5200000] (64MB) mapped at [ffffffc071200000-ffffffc0751fffff]
Memory: 1542108K/1903616K available (13822K kernel code, 1879K rwdata, 7220K rodata, 2048K init, 3198K bss, 226340K reserved, 135168K cma-reserved)
Virtual kernel memory layout:
modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
.init : 0xffffff8009600000 - 0xffffff8009800000 ( 2048 KB)
.text : 0xffffff8008080000 - 0xffffff8008e00000 ( 13824 KB)
.rodata : 0xffffff8008e00000 - 0xffffff8009600000 ( 8192 KB)
.data : 0xffffff8009800000 - 0xffffff80099d5e20 ( 1880 KB)
vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
0xffffffbdc0000000 - 0xffffffbdc2000000 ( 32 MB actual)
fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
memory : 0xffffffc000000000 - 0xffffffc080000000 ( 2048 MB)
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
HMP scheduling enabled.
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
**********************************************************
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
** **
** trace_printk() being used. Allocating extra memory. **
** **
** This means that this is a DEBUG kernel and it is **
** unsafe for production use. **
** **
** If you see this message and you are not debugging **
** the kernel, report this immediately to your vendor! **
** **
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
**********************************************************
NR_IRQS:64 nr_irqs:64 0
mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
MPM 1 irq mapping errored -517
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
clocksource: Switched to clocksource arch_sys_counter
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Smack: Initializing.
Smack: IPv6 port labeling enabled.
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys freezer
/cpus/cpu@0: Unknown CPU type
/cpus/cpu@1: Unknown CPU type
/cpus/cpu@100: Unknown CPU type
/cpus/cpu@101: Unknown CPU type
CPU0: update cpu_capacity 1024
ASID allocator initialised with 32768 entries
Configuring XPU violations to be fatal errors
MSM Memory Dump base table set up
MSM Memory Dump apps data table set up
clock-cpu-8996: configuring clocks for the perf cluster
cpu_clock_8996_early_init: finished CPU clock configuration
CPU1: update cpu_capacity 1024
CPU1: Booted secondary processor [512f2011]
CPU2: update cpu_capacity 1024
CPU2: Booted secondary processor [512f2051]
Brought up 3 CPUs
SMP: Total of 3 processors activated.
CPU features: detected feature: GIC system register CPU interface
CPU: All CPU(s) started at EL1
CPU2: update max cpu_capacity 1024
devtmpfs: initialized
CPU2: update max cpu_capacity 1024
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
cpuidle: using governor qcom
vdso: 2 pages (1 code @ ffffff8008e05000, 1 data @ ffffff8009804000)
DMA: preallocated 256 KiB pool for atomic allocations
exit: IPA_USB init success!
irq: no irq domain found for /soc/qcom,mdss_mdp@900000 !
spmi spmi-0: PMIC arbiter version v2 (0x20010000)
unable to find DT imem DLOAD mode node
unable to find DT imem EDLOAD mode node
sps:sps is ready.
irq: no irq domain found for /soc/pinctrl@01010000 !
cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
smd_channel_probe_now: allocation table not initialized
smd_channel_probe_now: allocation table not initialized
smd_channel_probe_now: allocation table not initialized
smd_channel_probe_now: allocation table not initialized
msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
msm_watchdog 9830000.qcom,wdt: No need to allocate memory for scandumps
msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
msm_rpm_dev_probe: APSS-RPM communication over GLINK
platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
smd_channel_probe_now: allocation table not initialized
kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
__of_mpm_init(): MPM driver mapping exists
irq: no irq domain found for /soc/qcom,sde_kms@900000 !
irq: no irq domain found for /soc/qcom,sde_kms@900000 !
irq: no irq domain found for /soc/qcom,sde_kms@900000 !
spm_regulator_probe: name=pm8994_s11, range=LV, voltage=1140000 uV, mode=AUTO, step rate=2400 uV/us
cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 2
cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=80000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 565000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 665000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 755000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 860000 uV
cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 313
cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 495, quot_offset[ 7]= 120
cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 680, quot_offset[ 7]= 185
cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 912, quot_offset[ 7]= 230
cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 2
cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 565000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 665000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 755000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 860000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: CBF offset open-loop= 565000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused LowSVS: CBF offset open-loop= 655000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: CBF offset open-loop= 675000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: CBF offset open-loop= 775000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: CBF offset open-loop= 900000 uV
cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 313
cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 495, quot_offset[ 7]= 120
cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 680, quot_offset[ 7]= 185
cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 912, quot_offset[ 7]= 230
cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 2
cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=130000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 575000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 675000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 745000 uV
cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop= 930000 uV
cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 331
cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 514, quot_offset[ 7]= 160
cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 658, quot_offset[ 7]= 140
cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1038, quot_offset[ 7]= 380
cpr3_regulator_init_ctrl: apcc: Default CPR mode = open-loop
cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
clock-cpu-8996: set OPP pair (768000000 Hz, 635000 uv) on cpu0
clock-cpu-8996: set OPP pair (1593600000 Hz, 810000 uv) on cpu0
clock-cpu-8996: set OPP pair (768000000 Hz, 635000 uv) on cpu1
clock-cpu-8996: set OPP pair (1593600000 Hz, 810000 uv) on cpu1
clock-cpu-8996: set OPP pair (825600000 Hz, 645000 uv) on cpu2
clock-cpu-8996: set OPP pair (2054400000 Hz, 895000 uv) on cpu2
clock-cpu-8996: set OPP pair (825600000 Hz, 645000 uv) on cpu3
clock-cpu-8996: set OPP pair (2054400000 Hz, 895000 uv) on cpu3
clock-cpu-8996: set OPP pair (537600000 Hz, 645000 uv) on soc:qcom,m4m
clock-cpu-8996: set OPP pair (1593600000 Hz, 900000 uv) on soc:qcom,m4m
msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
ACPI: Interpreter disabled.
KPI: Bootloader start count = 21859
KPI: Bootloader end count = 35495
KPI: Bootloader display count = 30728
KPI: Bootloader load kernel count = 3367
KPI: Kernel MPM timestamp = 50967
KPI: Kernel MPM Clock frequency = 32768
socinfo_print: v0.11, id=315, ver=1.1, raw_id=111, raw_ver=1, hw_plat=25, hw_plat_ver=65536
accessory_chip=0, hw_plat_subtype=2, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=3921073526 num_pmics=1
msm_bus_fabric_init_driver
of_graph_get_next_endpoint(): no port node found in /soc/ad-hoc-bus/fab-a0noc
of_graph_get_next_endpoint(): no port node found in /soc/ad-hoc-bus/fab-a1noc
of_graph_get_next_endpoint(): no port node found in /soc/ad-hoc-bus/fab-a2noc
of_graph_get_next_endpoint(): no port node found in /soc/ad-hoc-bus/fab-bimc
msm_bus_device 520000.ad-hoc-bus: Coresight support absent for bus: 5120
of_graph_get_next_endpoint(): no port node found in /soc/ad-hoc-bus/fab-mnoc
msm_bus_device 520000.ad-hoc-bus: Coresight support absent for bus: 2049
of_graph_get_next_endpoint(): no port node found in /soc/ad-hoc-bus/fab-pnoc
of_graph_get_next_endpoint(): no port node found in /soc/ad-hoc-bus/fab-snoc
msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
msm-bus-type fab-mnoc-ahb: Error: Failed to get regulator bus-gdsc:-517
msm-bus-type fab-mnoc-ahb: Error: Failed to get regulator bus-a-gdsc:-517
msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-ahb-no-rate:-517
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
soc:usb_nop_phy supply vcc not found, using dummy regulator
qcom,qpnp-power-on 400f000.qcom,spmi:qcom,pm8994@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from SMPL (sudden momentary power loss) and 'cold' boot
qcom,qpnp-power-on 400f000.qcom,spmi:qcom,pm8994@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)
input: qpnp_pon as /devices/virtual/input/input0
i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2
i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
cpufreq: driver msm up and running
platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
ION heap system created
ION heap adsp created at 0x00000000ff800000 with size 400000
ION heap qsecom created at 0x00000000fe400000 with size 1400000
ION heap secure_display created at 0x00000000f8800000 with size 5c00000
ION heap secure_heap created
PMIC@SID0: PM8994 v2.0 options: 0, 2, 2, 2
ipa ipa2_uc_state_check:296 uC interface not initialized
ipa ipa_sps_irq_control_all:963 EP (2) not allocated.
ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
sps:BAM 0x0000000000684000 is registered.
ipa ipa2_uc_state_check:296 uC interface not initialized
sps:BAM 0x0000000000684000 (va:0xffffff800a840000) enabled: ver:0x27, number of pipes:20
ipa ipa2_uc_state_check:296 uC interface not initialized
ipa ipa2_uc_state_check:296 uC interface not initialized
IPA driver initialization was successful.
gdsc_venus: supplied by gdsc_mmagic_video
gdsc_camss_top: supplied by gdsc_mmagic_camss
gdsc_vfe0: supplied by gdsc_camss_top
gdsc_vfe1: supplied by gdsc_camss_top
gdsc_mdss: supplied by gdsc_mmagic_mdss
gdsc_jpeg: supplied by gdsc_camss_top
gdsc_cpp: supplied by gdsc_camss_top
gdsc_fd: supplied by gdsc_camss_top
mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
mdss_pll_probe: Unable to get the cell-index rc=-22
arm-smmu b40000.arm,smmu-kgsl: Couldn't get clock: gpu_ahb_clk
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: Static smr mask not supported
arm-smmu 1660000.arm,smmu-anoc1: found 4 context interrupt(s) but have 3 context banks. assuming 3 context interrupts.
iommu: Adding device 600000.qcom,pcie to group 0
iommu: Adding device 608000.qcom,pcie to group 1
iommu: Adding device 610000.qcom,pcie to group 2
iommu: Adding device soc:usb_audio_qmi_dev to group 3
iommu: Adding device soc:qcom,msm-audio-ion to group 4
iommu: Adding device soc:iommu_test_device to group 5
iommu: Adding device 900000.qcom,sde_kms to group 6
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: ffffffc070d4bd20
NET: Registered protocol family 31
Bluetooth: ffffffc070d4bd20
Bluetooth: ffffffc070d4bd00
Bluetooth: ffffffc070d4bcd0
Bluetooth: ffffffc070d4bce0
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pcie:pcie_init.
600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
608000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
msm_pcie_get_resources: PCIe: RC1 can't get tcsr resource.
610000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
msm_pcie_get_resources: PCIe: RC2 can't get tcsr resource.
msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
arm-smmu b40000.arm,smmu-kgsl: Couldn't get clock: gpu_ahb_clk
clocksource: Switched to clocksource arch_sys_counter
pnp: PnP ACPI: disabled
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 64
msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
arm-smmu b40000.arm,smmu-kgsl: Couldn't get clock: gpu_ahb_clk
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.609:1): initialized
Initialise system trusted keyring
vmscan: error setting kswapd cpu affinity mask
fuse init (API version 7.23)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
adv7533_parse_vreg_dt: vreg not found. rc=-22
adv7533_config_vreg: Error: invalid power data
adv7533_enable_vreg: Error: invalid power data
hpd irq gpio not provided
adv7533_parse_vreg_dt: vreg not found. rc=-22
adv7533_config_vreg: Error: invalid power data
adv7533_enable_vreg: Error: invalid power data
hpd irq gpio not provided
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
In memshare_probe, Memshare probe success
subsys-pil-tz 9300000.qcom,lpass: invalid resource
subsys-pil-tz 9300000.qcom,lpass: Failed to iomap base register
subsys-pil-tz ce0000.qcom,venus: invalid resource
subsys-pil-tz ce0000.qcom,venus: Failed to iomap base register
subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
subsys-pil-tz 1c00000.qcom,ssc: invalid resource
subsys-pil-tz 1c00000.qcom,ssc: Failed to iomap base register
subsys-pil-tz soc:qcom,kgsl-hyp: invalid resource
subsys-pil-tz soc:qcom,kgsl-hyp: Failed to iomap base register
subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
smd_channel_probe_now: allocation table not initialized
pil-q6v5-mss 2080000.qcom,mss: No pas_id found.
pil: failed to find qcom,msm-imem-minidump node
msm_rpm_log_probe: OK
fan53555-regulator 7-0068: FAN53555 Option[5] Rev[3] Detected!
fan53555-reg: supplied by hl7509_en_vreg
uart_tx_gpio is not available
uart_rx_gpio is not available
uart_cts_gpio is not available
uart_rfr_gpio is not available
sps: BAM device 0x0000000007544000 is not registered yet.
sps:BAM 0x0000000007544000 is registered.
7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 31, base_baud = 460800) is a MSM HS UART
msm_serial_hs module loaded
random: nonblocking pool is initialized
diag: Unable to initialize POOL_MDM_DCI_WRITE mempool, itemsize: 0 poolsize: 0
[drm] Initialized drm 1.1.0 20060810
qcom,mdss-dsi-pre-on-command commands not defined
[dsi_adv7533_1080p] failed to parse set 0
qcom,mdss-dsi-on-command commands not defined
[dsi_adv7533_1080p] failed to parse set 1
qcom,mdss-dsi-post-panel-on-command commands not defined
[dsi_adv7533_1080p] failed to parse set 2
qcom,mdss-dsi-pre-off-command commands not defined
[dsi_adv7533_1080p] failed to parse set 3
qcom,mdss-dsi-off-command commands not defined
[dsi_adv7533_1080p] failed to parse set 4
qcom,mdss-dsi-post-off-command commands not defined
[dsi_adv7533_1080p] failed to parse set 5
qcom,mdss-dsi-pre-res-switch commands not defined
[dsi_adv7533_1080p] failed to parse set 6
qcom,mdss-dsi-res-switch commands not defined
[dsi_adv7533_1080p] failed to parse set 7
qcom,mdss-dsi-post-res-switch commands not defined
[dsi_adv7533_1080p] failed to parse set 8
qcom,cmd-to-video-mode-switch-commands commands not defined
[dsi_adv7533_1080p] failed to parse set 9
qcom,cmd-to-video-mode-post-switch-commands commands not defined
[dsi_adv7533_1080p] failed to parse set 10
qcom,video-to-cmd-mode-switch-commands commands not defined
[dsi_adv7533_1080p] failed to parse set 11
qcom,video-to-cmd-mode-post-switch-commands commands not defined
[dsi_adv7533_1080p] failed to parse set 12
qcom,mdss-dsi-panel-status-command commands not defined
[dsi_adv7533_1080p] failed to parse set 13
No supply entry present for qcom,panel-supply-entries
[dsi_adv7533_1080p] failed to parse vregs
failed to parse power config, rc=-22
[dsi_adv7533_1080p] failed get reset gpio, rc=0
failed to parse panel gpios, rc=-22
[dsi_adv7533_1080p] failed get bklt gpio, rc=-22
failed to parse backlight config, rc=-22
msm-dsi-display:[dsi_display_clocks_init] failed to get mux_byte_clk, rc=-2
qcom,mdss-dsi-pre-on-command commands not defined
[dsi_adv7533_1080p] failed to parse set 0
qcom,mdss-dsi-on-command commands not defined
[dsi_adv7533_1080p] failed to parse set 1
qcom,mdss-dsi-post-panel-on-command commands not defined
[dsi_adv7533_1080p] failed to parse set 2
qcom,mdss-dsi-pre-off-command commands not defined
[dsi_adv7533_1080p] failed to parse set 3
qcom,mdss-dsi-off-command commands not defined
[dsi_adv7533_1080p] failed to parse set 4
qcom,mdss-dsi-post-off-command commands not defined
[dsi_adv7533_1080p] failed to parse set 5
qcom,mdss-dsi-pre-res-switch commands not defined
[dsi_adv7533_1080p] failed to parse set 6
qcom,mdss-dsi-res-switch commands not defined
[dsi_adv7533_1080p] failed to parse set 7
qcom,mdss-dsi-post-res-switch commands not defined
[dsi_adv7533_1080p] failed to parse set 8
qcom,cmd-to-video-mode-switch-commands commands not defined
[dsi_adv7533_1080p] failed to parse set 9
qcom,cmd-to-video-mode-post-switch-commands commands not defined
[dsi_adv7533_1080p] failed to parse set 10
qcom,video-to-cmd-mode-switch-commands commands not defined
[dsi_adv7533_1080p] failed to parse set 11
qcom,video-to-cmd-mode-post-switch-commands commands not defined
[dsi_adv7533_1080p] failed to parse set 12
qcom,mdss-dsi-panel-status-command commands not defined
[dsi_adv7533_1080p] failed to parse set 13
No supply entry present for qcom,panel-supply-entries
[dsi_adv7533_1080p] failed to parse vregs
failed to parse power config, rc=-22
[dsi_adv7533_1080p] failed get reset gpio, rc=0
failed to parse panel gpios, rc=-22
[dsi_adv7533_1080p] failed get bklt gpio, rc=-22
failed to parse backlight config, rc=-22
msm-dsi-display:[dsi_display_clocks_init] failed to get mux_byte_clk, rc=-2
9a0000.qcom,hdmi_tx_8996 supply hpd-5v not found, using dummy regulator
msm_drm 900000.qcom,sde_kms: bound 9a0000.qcom,hdmi_tx_8996 (ops hdmi_ops)
msm_drm 900000.qcom,sde_kms: bound soc:qcom,hdmi-display (ops sde_hdmi_comp_ops)
failed to get pinctrl, rc=-22
[dsi_adv7533_1080p] failed to init pinctrl, rc=-22
[drm] backlight type is unknown
msm_drm 900000.qcom,sde_kms: bound soc:qcom,dsi-display@7 (ops dsi_display_comp_ops)
failed to get pinctrl, rc=-22
[dsi_adv7533_1080p] failed to init pinctrl, rc=-22
[drm] backlight type is unknown
msm_drm 900000.qcom,sde_kms: bound soc:qcom,dsi-display@8 (ops dsi_display_comp_ops)
msm_drm 900000.qcom,sde_kms: bound b00000.qcom,kgsl-3d0 (ops a3xx_ops)
[drm:sde_dbg_init:1853] evtlog_status: enable:0, panic:1, dump:2
[drm] mapped mdp address space @ffffff800b900000
[drm:sde_kms_hw_init:1356] sde hardware revision:0x10070002
brd: module loaded
[drm:_sde_vp_parse_dt:1973] [sde error]No entry present for qcom,sde-plane-id-map
[drm:sde_dbg_init_dbg_buses:1783] unsupported chipset id 268894210
[drm] blk: 0, addr:0000000083401000, size:00000000023fefff
[drm] blk: 1, addr:00000000bdd00000, size:00000000023fefff
[drm] blk: 2, addr:00000000b3fff000, size:00000000007fffff
[drm] lk_pool: addr:0000000091600000, size:00000000005fffff
[drm] found domain 0 compat: qcom,smmu_sde_unsec
[drm] Created domain mdp_ns [20000,fffe0000] secure=0
loop: module loaded
zram: Added device: zram0
[drm] found domain 1 compat: qcom,smmu_sde_nrt_unsec
[drm:msm_smmu_new] *ERROR* unable to find compatible node for qcom,smmu_sde_nrt_unsec
[drm] failed to init iommu id 1: rc: -19
[drm] found domain 2 compat: qcom,smmu_sde_sec
iommu: Adding device 900000.qcom,sde_kms:qcom,smmu_kms_sec_cb to group 7
[drm] probing device qcom,smmu_sde_sec
[drm] Created domain mdp_s [20000,fffe0000] secure=1
[drm] found domain 3 compat: qcom,smmu_sde_nrt_sec
[drm:msm_smmu_new] *ERROR* unable to find compatible node for qcom,smmu_sde_nrt_sec
[drm] failed to init iommu id 3: rc: -19
[drm] DSI splash enabled
[drm] client:dsi bridge:[adv7533:0] attached
[drm] DSI splash disabled
[drm] client:dsi bridge:[adv7533:1] attached
adv7533_config_vreg: Error: invalid power data
adv7533_enable_vreg: Error: invalid power data
[drm:sde_wb_drm_init:601] [sde error]invalid params
[drm:_sde_kms_setup_displays:710] [sde error]wb bridge 0 init failed, -22
[drm] HDMI splash disabled
[drm] pipe1 is reserved
[drm] plane38 created for pipe 1
[drm] plane60 created for pipe 2
[drm] plane62 created for pipe 3
[drm] plane64 created for pipe 4
[drm] plane66 created for pipe 5
[drm] plane68 created for pipe 6
[drm] plane70 created for pipe 7
[drm] plane72 created for pipe 8
[drm] plane74 created for pipe 9
[drm] plane76 created for pipe 10
[drm] plane78 created for pipe 13
[drm] plane80 created for pipe 14
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
[drm] Initialized msm_drm 1.0.0 20130625 on minor 0
QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000
QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
QSEECOM: qseecom_probe: no-clock-support=0x1
QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
qce 660000.qcedev: CE device = 0x0
IO base, CE = 0xffffff800b840000
Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
IO base BAM = 0x0000000000000000
BAM IRQ 193
Engines Availability = 0x2011053
sps:BAM 0x0000000000644000 is registered.
sps:BAM 0x0000000000644000 (va:0xffffff800b8c0000) enabled: ver:0x27, number of pipes:16
QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 193
qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
qcrypto 660000.qcrypto: CE device = 0x0
IO base, CE = 0xffffff800b9c0000
Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
IO base BAM = 0x0000000000000000
BAM IRQ 193
Engines Availability = 0x2011053
QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 193
qcrypto 660000.qcrypto: qcrypto-ecb-aes
qcrypto 660000.qcrypto: qcrypto-cbc-aes
qcrypto 660000.qcrypto: qcrypto-ctr-aes
qcrypto 660000.qcrypto: qcrypto-ecb-des
qcrypto 660000.qcrypto: qcrypto-cbc-des
qcrypto 660000.qcrypto: qcrypto-ecb-3des
qcrypto 660000.qcrypto: qcrypto-cbc-3des
qcrypto 660000.qcrypto: qcrypto-xts-aes
qcrypto 660000.qcrypto: qcrypto-sha1
qcrypto 660000.qcrypto: qcrypto-sha256
qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
qcrypto 660000.qcrypto: qcrypto-hmac-sha1
qcrypto 660000.qcrypto: qcrypto-hmac-sha256
qcrypto 660000.qcrypto: qcrypto-aes-ccm
qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
SCSI Media Changer driver v0.25
sps:BAM 0x0000000007544000 (va:0xffffff800afc0000) enabled: ver:0x19, number of pipes:24
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
CAN device driver interface
rh850 spi9.0: rh850_probe
rh850 spi9.0: rh850_probe created priv_data
rh850 spi9.0: Request irq 423 ret 0
usbcore: registered new interface driver kvaser_usb
usbcore: registered new interface driver peak_usb
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
rh850 spi9.0: fw 1.9
rh850 spi9.0: fw string v(1.9):Jun 1 2016,11:57:32
msm_pcie_enable: PCIe: Assert the reset of endpoint of RC1.
msm_pcie_enable: PCIe RC1 PHY is ready!
msm_pcie_enable: PCIe: Release the reset of endpoint of RC1.
msm_pcie_enable: PCIe RC1 link initialized
PCI host bridge /soc/qcom,pcie@00608000 ranges:
No bus range found for /soc/qcom,pcie@00608000, using [bus 00-ff]
IO 0x0d200000..0x0d2fffff -> 0x0d200000
MEM 0x0d300000..0x0dffffff -> 0x0d300000
pci-msm 608000.qcom,pcie: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [bus 00-ff]
pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0xd200000-0xd2fffff])
pci_bus 0001:00: root bus resource [mem 0x0d300000-0x0dffffff]
pci 0001:00:00.0: [17cb:0104] type 01 class 0x060400
pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0001:00:00.0 to group 8
pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0001:01:00.0: [1179:021a] type 00 class 0x010802
pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x0007ffff 64bit pref]
pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
pci 0001:01:00.0: PME# supported from D0 D3hot
iommu: Adding device 0001:01:00.0 to group 9
pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
pci 0001:00:00.0: BAR 8: assigned [mem 0x0d400000-0x0d5fffff]
pci 0001:00:00.0: BAR 9: assigned [mem 0x0d600000-0x0d7fffff 64bit pref]
pci 0001:00:00.0: BAR 0: assigned [mem 0x0d300000-0x0d300fff 64bit]
pci 0001:01:00.0: BAR 0: assigned [mem 0x0d400000-0x0d5fffff 64bit]
pci 0001:01:00.0: BAR 4: assigned [mem 0x0d600000-0x0d6fffff 64bit pref]
pci 0001:01:00.0: BAR 2: assigned [mem 0x0d700000-0x0d77ffff 64bit pref]
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0: bridge window [mem 0x0d400000-0x0d5fffff]
pci 0001:00:00.0: bridge window [mem 0x0d600000-0x0d7fffff 64bit pref]
ntn_avb soc:qcom,ntn_avb: probe success
msm_pcie_pm_control: PCIe: RC1: requested to resume when link is not disabled:1. Number of active EP(s): 0
DWC_ETH_QOS 0001:01:00.0: enabling device (0000 -> 0002)
ERROR: Boot from flash failed
DBG Resvd area: 0xb46deea0
NTN FW Version: 739038.14
Mac configuration file not found
Using Default MAC Address
MAC Address: e8:e0:b7:b5:7d:f8
ntn_config.ini configuration file not found
NTN IPA enabled: 0
netif_napi_add() called with weight 384 on device eth%d
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
msm_sharedmem: sharedmem_register_qmi: qmi init successful
msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
msm_pcie_enable: PCIe RC0 PHY is ready!
msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
msm_pcie_enable: PCIe RC0 link initialized
PCI host bridge /soc/qcom,pcie@00600000 ranges:
No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
IO 0x0c200000..0x0c2fffff -> 0x0c200000
MEM 0x0c300000..0x0cffffff -> 0x0c300000
pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xc200000-0xc2fffff])
pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:00:00.0 to group 10
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:01:00.0 to group 11
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff]
pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff]
cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
cnss: Platform driver probed successfully.
msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
msm-dwc3 6a00000.ssusb: unable to get dbm device
7600000.hsusb supply USB3_GDSC not found, using dummy regulator
msm-dwc3 7600000.hsusb: unable to read platform data tx fifo size
msm-dwc3 7600000.hsusb: Could not get usb power_supply
msm-dwc3 7600000.hsusb: DWC3 exited from low power mode
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x00010010
xhci-hcd xhci-hcd.0.auto: irq 581, io mem 0x07600000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usb_ehset_test
usbcore: registered new interface driver ks_bridge
ksb_init: init done
usbcore: registered new interface driver diag_bridge
mousedev: PS/2 mouse device common for all mice
input: hbtp_vm as /devices/virtual/input/input1
qcom,qpnp-rtc 400f000.qcom,spmi:qcom,pm8994@0:qcom,pm8994_rtc: rtc core: registered qpnp_rtc as rtc0
i2c /dev entries driver
adv7481_cci_init: Enter
adv7481_probe: failed adv7481_cci_init ret -517
iommu: Adding device c00000.qcom,vidc:non_secure_cb to group 12
iommu: Adding device c00000.qcom,vidc:firmware_cb to group 13
iommu: Adding device c00000.qcom,vidc:secure_bitstream_cb to group 14
iommu: Adding device c00000.qcom,vidc:secure_pixel_cb to group 15
iommu: Adding device c00000.qcom,vidc:secure_non_pixel_cb to group 16
msm_vidc_vmem: Up and running with 4 banks of memory from [mem size 0x3f901966c9 pref window]
sde_mdp_parse_dt_prop_len: prop qcom,mdss-rot-xin-id : doesn't exist in device tree
iommu: Adding device 900000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 17
iommu: Adding device 900000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 18
sde_rotator_search_dt_clk: unable to get clk: mnoc_clk
sde_rotator_register_clk: unable to parse clocks
sde_rotator_core_init: res_init failed -22
sde_rotator 900000.qcom,mdss_rotator: fail init core -22
Invalid index Defaulting curr to 0
sde_rotator: probe of 900000.qcom,mdss_rotator failed with error -22
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 19
iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 20
iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 21
iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb5 to group 22
iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb6 to group 23
iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb7 to group 24
msm_actuator_platform_probe:1986 No valid actuator GPIOs data
msm_actuator_platform_probe:1986 No valid actuator GPIOs data
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
md: linear personality registered for level -1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
device-mapper: req-crypt: dm-req-crypt successfully initalized.
bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
bt_dt_parse_clk_info: clocks is not provided in device tree
bt_power_populate_dt_pinfo: clock not provided in device tree
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci_msm 7464900.sdhci: sdhci_msm_probe: ICE device is not enabled
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
sdhci_msm 7464900.sdhci: No vmmc regulator found
sdhci_msm 7464900.sdhci: No vqmmc regulator found
mmc0: SDHCI controller on 7464900.sdhci [7464900.sdhci] using 64-bit ADMA in CMDQ mode
ipa_ut ipa_ut_module_init:968 Loading IPA test module...
ipa_ut ipa_ut_framework_init:872 No IPA debugfs root entry
ipa_ut ipa_ut_module_init:997 framework init failed
mmc0: Out-of-interrupt timeout is 100[ms]
mmc0: eMMC FW version: 0x04
mmc0: CMDQ supported: depth: 32
mmc0: cache barrier support 1 flush policy 1
cmdq_host_alloc_tdl: desc_size: 768 data_sz: 63488 slot-sz: 24
mmc0: CMDQ enabled on card
mmc0: new HS400 Enhanced strobe MMC card at address 0001
sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3) latency=-1
sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc) latency=-1
mmcblk0: mmc0:0001 032G34 29.1 GiB
mmcblk0rpmb: mmc0:0001 032G34 partition 3 4.00 MiB
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50
sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
sdhci_msm 74a4900.sdhci: No vmmc regulator found
sdhci_msm 74a4900.sdhci: No vqmmc regulator found
mmc1: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
usb 1-1: new low-speed USB device number 2 using xhci-hcd
m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
kryo perfevents: CPU pmu for kryo-pmuv3 detected
hw perfevents: enabled with qcom,kryo-pmuv3 PMU driver, 9 counters available
of_graph_get_next_endpoint(): no port node found in /soc/csr@3001000
coresight-csr 3001000.csr: CSR initialized
of_graph_get_next_endpoint(): no port node found in /soc/cti@3010000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3011000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3012000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3013000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3014000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3015000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3016000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3017000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3018000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3019000
of_graph_get_next_endpoint(): no port node found in /soc/cti@301a000
of_graph_get_next_endpoint(): no port node found in /soc/cti@301b000
of_graph_get_next_endpoint(): no port node found in /soc/cti@301c000
of_graph_get_next_endpoint(): no port node found in /soc/cti@301d000
of_graph_get_next_endpoint(): no port node found in /soc/cti@301e000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3820000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3920000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3a20000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3b20000
of_graph_get_next_endpoint(): no port node found in /soc/cti@38a0000
of_graph_get_next_endpoint(): no port node found in /soc/cti@39a0000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3aa0000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3ba0000
of_graph_get_next_endpoint(): no port node found in /soc/cti@38b0000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3ab0000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3ad0000
of_graph_get_next_endpoint(): no port node found in /soc/cti@39c0000
of_graph_get_next_endpoint(): no port node found in /soc/cti@39d0000
of_graph_get_next_endpoint(): no port node found in /soc/cti@38d0000
of_graph_get_next_endpoint(): no port node found in /soc/cti@39f0000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3180000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3044000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3048000
of_graph_get_next_endpoint(): no port node found in /soc/cti@3040000
sps:BAM 0x0000000003084000 is registered.
coresight-tmc 3028000.tmc: TMC initialized
coresight-tmc 3027000.tmc: TMC initialized
coresight-tpiu 3020000.tpiu: TPIU initialized
coresight-funnel 3025000.funnel: FUNNEL initialized
coresight-funnel 3021000.funnel: FUNNEL initialized
coresight-funnel 3022000.funnel: FUNNEL initialized
coresight-funnel 3023000.funnel: FUNNEL initialized
coresight-funnel 3bc0000.funnel: FUNNEL initialized
coresight-funnel 39b0000.funnel: FUNNEL initialized
coresight-funnel 3bb0000.funnel: FUNNEL initialized
coresight-funnel 3184000.funnel: FUNNEL initialized
coresight-replicator-qcom 3026000.replicator: REPLICATOR 1.0 initialized
coresight-stm 3002000.stm: STM initialized
of_graph_get_next_endpoint(): no port node found in /soc/qpdi@7a1000
coresight-qpdi 7a1000.qpdi: QPDI hotplug card detection is not supported
coresight-qpdi 7a1000.qpdi: CoreSight QPDI driver initialized
of_graph_get_next_endpoint(): no port node found in /soc/hwevent@98200c0
coresight-hwevent 98200c0.hwevent: Hardware Event driver initialized
usbcore: registered new interface driver snd-usb-audio
msm8996-pinctrl 1010000.pinctrl: pin GPIO_69 already requested by soc:qcom,ntn_avb; cannot claim for soc:audio_ext_clk
msm8996-pinctrl 1010000.pinctrl: pin-69 (soc:audio_ext_clk) status -22
msm8996-pinctrl 1010000.pinctrl: could not request pin 69 (GPIO_69) from group gpio69 on device 1010000.pinctrl
audio-ref-clk soc:audio_ext_clk: Error applying setting, reverse things back
audio-ref-clk soc:audio_ext_clk: audio_get_pinctrl: Disable TLMM pins failed with -22
msm-dai-tdm soc:qcom,msm-dai-tdm-pri-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx group_id: 0x9100
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0 dev_id: 0x9000
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-1 dev_id: 0x9002
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-2 dev_id: 0x9004
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-3 dev_id: 0x9006
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-tdm soc:qcom,msm-dai-tdm-pri-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx group_id: 0x9101
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0 dev_id: 0x9001
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-1 dev_id: 0x9003
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-2 dev_id: 0x9005
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-3 dev_id: 0x9007
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-tdm soc:qcom,msm-dai-tdm-sec-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx group_id: 0x9110
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0 dev_id: 0x9010
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-1 dev_id: 0x9012
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-2 dev_id: 0x9014
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-3 dev_id: 0x9016
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1 dev_id: 0x9013
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-2 dev_id: 0x9015
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-3 dev_id: 0x9017
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-4: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-4 dev_id: 0x9028
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-4: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-5: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-5 dev_id: 0x902a
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-5: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
GACT probability NOT on
Mirror/redirect action on
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
ipip: IPv4 over IPv4 tunneling driver
IPv4 over IPsec tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Ebtables v2.0 registered
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
l2tp_core: L2TP core driver, V2.0
l2tp_ip: L2TP IP encapsulation support (L2TPv3)
l2tp_netlink: L2TP netlink interface
l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
8021q: 802.1Q VLAN Support v1.8
NET: Registered protocol family 27
msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
cpr3_msm8996_mmss_read_fuse_data: gfx_corner: speed bin = 0
cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 0
cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 580000 uV
cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 645000 uV
cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 775000 uV
cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 925000 uV
cpr3_regulator_init_ctrl: gfx: Default CPR mode = open-loop
arm-smmu b40000.arm,smmu-kgsl: Couldn't get clock: gpu_ahb_clk
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
subsys-pil-tz 9300000.qcom,lpass: invalid resource
subsys-pil-tz 9300000.qcom,lpass: Failed to iomap base register
subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
subsys-pil-tz 1c00000.qcom,ssc: invalid resource
subsys-pil-tz 1c00000.qcom,ssc: Failed to iomap base register
subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
pil-q6v5-mss 2080000.qcom,mss: No pas_id found.
pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
pil-q6v5-mss 2080000.qcom,mss: for md_modem segments only will be dumped.
sps:BAM 0x0000000006b04000 is registered.
msm-dwc3 6a00000.ssusb: Could not get usb power_supply
adv7481_cci_init: Enter
msm_cci_init:1398: hw_version = 0x10040000
msm-dwc3 6a00000.ssusb: DWC3 exited from low power mode
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x00010010
xhci-hcd xhci-hcd.1.auto: irq 744, io mem 0x06a00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
msm_cci_irq:1739 MASTER_0 error 0x8000000
usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: KYE OPTICAL MOUSE as /devices/soc/7600000.hsusb/7600000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1:1.0/0003:0458:005E.0001/input/input2
hid-generic 0003:0458:005E.0001: input: USB HID v1.10 Mouse [KYE OPTICAL MOUSE] on usb-xhci-hcd.0.auto-1/input0
usb 3-1: new high-speed USB device number 2 using xhci-hcd
msm_cci_wait: 297 wait for queue: 0
msm_cci_transfer_end: 518 failed rc -110
msm_cci_data_queue: 774 failed rc -110
msm_camera_cci_i2c_write: line 144 rc = -110
Error -110 writing cci i2c
adv7481_probe: Failed Soft reset -110
adv7481: probe of 70.qcom,adv7481 failed with error -110
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
gfx3d_clk_src_v2: set OPP pair(315000000 Hz: 650000 uV) on b00000.qcom,kgsl-3d0
gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 910000 uV) on b00000.qcom,kgsl-3d0
qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
gdsc_gpu_gx: supplied by gfx_corner
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: a972d3e9fddee67b4a4062d849e3ff4f18a3dc16'
Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
Key type encrypted registered
msm_smem 86000000.qcom,smem: for smem segments only will be dumped.
scm_call failed: func id 0x42001601, ret: -1, syscall returns: 0x0, 0x0, 0x0
fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
ADSPRPC: gcinfo[0].heap_vmid 6
iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 25
iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 26
iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 27
iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 28
iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 29
iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 30
iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 31
iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 32
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
RNDIS_IPA module is loaded.
input: gpio-keys as /devices/soc/soc:gpio_keys/input/input3
qcom,qpnp-rtc 400f000.qcom,spmi:qcom,pm8994@0:qcom,pm8994_rtc: setting system clock to 1970-01-01 00:10:48 UTC (648)
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
sde_smmu_probe: probe failed as mdata is not initialized
lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
sde_smmu_probe: probe failed as mdata is not initialized
lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
parse_cpu_levels: idx 1 545
parse_cpu_levels: idx 2 6022
parse_cpu_levels: idx 2 11499
parse_cpu_levels: idx 1 545
parse_cpu_levels: idx 2 6022
parse_cpu_levels: idx 2 11499
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
rmnet_ipa started initialization
IPA SSR support = True
IPA ipa-loaduC = True
IPA SG support = True
IPA Napi Enable = False
using default for wan-rx-desc-size = 1024
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
ipa ipa2_uc_state_check:301 uC is not loaded
rmnet_ipa completed initialization
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
apc0_pwrcl_mem_acc_corner: disabling
apc1_perfcl_mem_acc_corner: disabling
apcc_l3_mem_acc_corner: disabling
gfx_mem_acc_corner: disabling
kryo0-retention: disabling
kryo1-retention: disabling
gdsc_mmagic_bimc: disabling
rome_vreg: disabling
wlan_en_vreg: disabling
gdsc_ufs: disabling
regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
clock_late_init: Removing enables held for handed-off clocks
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
ALSA device list:
No soundcards found.
Warning: unable to open an initial console.
asix 3-1:1.0 eth1: register 'asix' at usb-xhci-hcd.1.auto-1, ASIX AX88772 USB 2.0 Ethernet, 84:af:ec:a2:2e:65
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 179:18.
devtmpfs: mounted
Freeing unused kernel memory: 2048K
systemd[1]: Successfully loaded Smack policies.
systemd[1]: System time before build time, advancing clock.
systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture arm64.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd[1]: adbd.service: Cannot add dependency job, ignoring: Unit adbd.service is masked.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Android Binder IPC.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Mounting Debug File System...
systemd[1]: Created slice system-agl\x2duser\x2dsession.slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Paths.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting Configuration File System...
systemd[1]: Reached target Login Prompts.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Swap.
systemd[1]: Mounting Temporary Directory...
systemd[1]: dev-hugepages.mount: Couldn't determine result for ConditionVirtualization=!private-users, assuming failed: No such file or directory
systemd[1]: Starting Journal Service...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Temporary Directory.
EXT4-fs (mmcblk0p18): re-mounted. Opts: (null)
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting /var/volatile...
systemd[1]: Mounted /var/volatile.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Started Journal Service.
systemd-journald[473]: Received request to flush runtime journal from PID 1
Error: Driver 'IPCRTR' is already registered, aborting...
IPC_RTR: msm_ipc_router_smd_driver_register: Failed to register platform driver [IPCRTR]
IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p42): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p41): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p50): mounted filesystem with ordered data mode. Opts: (null)
rh850 spi9.0 can0: ch0, bitrate setting>250000
rh850 spi9.0 can1: ch1, bitrate setting>250000
adsp-loader soc:qcom,msm-adsp-loader: adsp_loader_do: scheduling work to load ADSP fw
subsys-pil-tz 9300000.qcom,lpass: adsp: loading from 0x000000008ea00000 to 0x0000000090400000
rmt_storage:INFO:main: Done with init now waiting for messages!
rh850 spi9.0 can2: ch2, bitrate setting>250000
msm_thermal:store_cc_enabled Core control disabled
msm_thermal:store_cc_enabled Core control enabled
capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
rh850 spi9.0 can3: ch3, bitrate setting>250000
subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
IPA received MPSS BEFORE_POWERUP
Starting qti: QTI:start
ipa ipa2_uc_state_check:301 uC is not loaded
ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
IPA BEFORE_POWERUP handling is complete
pil-q6v5-mss 2080000.qcom,mss: modem: loading from 0x0000000088800000 to 0x000000008ea00000
done
QTI embd_mode
subsys-pil-tz 9300000.qcom,lpass: adsp: Brought out of reset
scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
subsys-pil-tz 9300000.qcom,lpass: adsp: Power/Clock ready interrupt received
subsys-pil-tz 9300000.qcom,lpass: Subsystem error monitoring/handling services are up
sysmon_send_event_no_qmi: Message sending failed -19
apr_tal:Q6 Is Up
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
apq8096-auto-asoc-snd soc:sound-adp-agave: ASoC: platform (null) not registered
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
apq8096-auto-asoc-snd soc:sound-adp-agave: control 2:0:0:HFP TX Mute:0 is already present
msm-pcm-loopback soc:qcom,msm-pcm-loopback-low-latency: ASoC: Failed to add HFP TX Mute: -16
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM_UL28
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia28 Mixer -> direct -> MM_UL28
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM_UL29
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia29 Mixer -> direct -> MM_UL29
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL28 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI_MI2S_TX -> PRI_MI2S_TX -> AUDIO_REF_EC_UL28 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL28 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> AUDIO_REF_EC_UL28 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL28 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> AUDIO_REF_EC_UL28 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL28 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> AUDIO_REF_EC_UL28 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL29 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI_MI2S_TX -> PRI_MI2S_TX -> AUDIO_REF_EC_UL29 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL29 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> AUDIO_REF_EC_UL29 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL29 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT_MI2S_TX -> TERT_MI2S_TX -> AUDIO_REF_EC_UL29 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO_REF_EC_UL29 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT_MI2S_TX -> QUAT_MI2S_TX -> AUDIO_REF_EC_UL29 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL28 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL28 MUX -> direct -> MM_UL28
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL29 MUX
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL29 MUX -> direct -> MM_UL29
msm_thermal:set_enabled enabled = 0
audit: type=1325 audit(1536575771.019:2): table=filter family=2 entries=4
sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
diag: In diag_send_feature_mask_update, control channel is not open, p: 1, ffffff8009b2f2f0
diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 1
diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 1
audit: type=1325 audit(1536575771.069:3): table=mangle family=2 entries=6
wlan: loading out-of-tree module taints kernel.
audit: type=1325 audit(1536575771.129:4): table=nat family=2 entries=5
wlan: loading driver v4.0.11.213V
audit: type=1325 audit(1536575771.169:5): table=mangle family=2 entries=6
audit: type=1325 audit(1536575771.199:6): table=mangle family=2 entries=10
msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
msm_pcie_enable: PCIe RC0 PHY is ready!
msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
msm_pcie_enable: PCIe RC0 link initialized
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
audit: type=1325 audit(1536575771.549:7): table=filter family=2 entries=0
audit: type=1325 audit(1536575771.549:8): table=mangle family=2 entries=0
audit: type=1325 audit(1536575771.549:9): table=nat family=2 entries=0
audit: type=1325 audit(1536575771.549:10): table=raw family=2 entries=0
audit: type=1325 audit(1536575771.549:11): table=filter family=3 entries=0
audit: type=1325 audit(1536575771.549:12): table=filter family=10 entries=0
audit: type=1325 audit(1536575771.549:13): table=mangle family=10 entries=0
audit: type=1325 audit(1536575771.549:14): table=raw family=10 entries=0
file system registered
Mac configuration file not found
Using Default MAC Address
f_cdev_alloc: port_name:at_usb0 (ffffffc064de6400) portno:(0)
msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux AUDIO_REF_EC_UL16 MUX has no paths
f_cdev_alloc: port_name:at_usb1 (ffffffc064de6c00) portno:(1)
PHY link still is not up, resume it!!!!
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
8021q: adding VLAN 0 to HW filter on device eth0
asix 3-1:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
asix 3-1:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
Switching to composition number 0x901D
msm_drm 900000.qcom,sde_kms: A530: using IOMMU 'gpu'
iommu: Adding device b40000.qcom,kgsl-iommu:gfx3d_user to group 33
iommu: Adding device b40000.qcom,kgsl-iommu:gfx3d_secure to group 34
msm_drm 900000.qcom,sde_kms: A530: using IOMMU 'gpu_secure'
subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap: loading from 0x0000000090400000 to 0x0000000090402000
subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap: Brought out of reset
Starting adbd:
apq8096-auto-asoc-snd soc:sound-adp-agave: control 2:0:0:EC Reference Channels:0 is already present
apq8096-auto-asoc-snd soc:sound-adp-agave: ASoC: Failed to add EC Reference Channels: -16
apq8096-auto-asoc-snd soc:sound-adp-agave: Sound card apq8096-adp-agave-snd-card registered
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
pil-q6v5-mss 2080000.qcom,mss: Debug policy not present - msadp. Continue.
pil-q6v5-mss 2080000.qcom,mss: Loading MBA and DP (if present) from 0x00000000f8000000 to 0x00000000f8100000 size 100000
hif_pci_probe:, con_mode= 0x0
PCI device id is 003e :003e
cnss_wlan_pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
hif_pci_configure : num_desired MSI set to 0
Using PCI Legacy Interrupt
pil-q6v5-mss 2080000.qcom,mss: MBA boot done
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 36912
afe_find_cal: no matching cal_block found
send_afe_cal_type cal_block not found!!
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 36914
afe_find_cal: no matching cal_block found
send_afe_cal_type cal_block not found!!
hif_pci_probe: ramdump base 0xffffff800dd01000 size 2097152
R0: wlan: [880:E :HDD] hdd_apply_cfg_ini: Reg Parameter gRrmOperChanMax > allowed Maximum [8 > 7]. Enforcing Default= 4
R0: wlan: [880:E :HDD] hdd_apply_cfg_ini: Reg Parameter gRrmNonOperChanMax > allowed Maximum [8 > 7]. Enforcing Default= 4
R0: wlan: [880:E :HDD] hdd_apply_cfg_ini: Reg Parameter gIPALowBandwidthMbps > allowed Maximum [200 > 100]. Enforcing Default= 100
R0: wlan: [880:E :HDD] hdd_apply_cfg_ini: Reg Parameter gtsf_gpio_pin > allowed Maximum [255 > 254]. Enforcing Default= 255
R0: wlan: [880:E :HDD] hdd_apply_cfg_ini: Reg Parameter 5g_rssi_boost_threshold < allowed Minimum [4294967236 < 18446744073709551546]. Enforcing Default= 18446744073709551556
R0: wlan: [880:E :HDD] hdd_apply_cfg_ini: Reg Parameter 5g_rssi_penalize_threshold < allowed Minimum [4294967226 < 18446744073709551536]. Enforcing Default= 18446744073709551546
R0: wlan: [880:E :HDD] Name = [gEnableHostapdEdcaLocal] Value = [0]
R0: wlan: [880:E :HDD] Name = [g_sta_change_cc_via_beacon] Value = [0]
ipa ipa2_uc_reg_rdyCB:1735 bad parm. inout= (null)
R0: [modprobe][10:36:13.365847] wlan: [880:E :HDD] Name = [gEnableHostapdEdcaLocal] Value = [0]
R0: [modprobe][10:36:13.365960] wlan: [880:E :HDD] Name = [g_sta_change_cc_via_beacon] Value = [0]
send_filled_buffers_to_user: Send Failed -3 drop_count = 1
NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
ol_download_firmware: Using 0x1234 for the remainder of init
ol_transfer_codeswap_struct: failed to get codeswap structure
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 36916
R0: [modprobe][10:36:13.442149] wlan: [880:E :VOS] __ol_transfer_bin_file: transferring file: otp30.bin size 24209 bytes done!
ol_download_firmware: chip_id:0x5030000 board_id:0x21
Board extended Data download address: 0x0
R0: [modprobe][10:36:13.450585] wlan: [880:E :VOS] __ol_transfer_bin_file: transferring file: bdwlan30.b21 size 8124 bytes done!
__ol_transfer_bin_file: no Setup file defined
msm-pcm-loopback soc:qcom,msm-pcm-loopback: msm_pcm_open: Instance = 1, Stream ID = MultiMedia6 (*)
afe_open: port_id 0x100a rate 16000
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 4106
afe_open: port_id 0x100b rate 16000
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 4107
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 36912
msm-pcm-loopback soc:qcom,msm-pcm-loopback-low-latency: msm_pcm_open: Instance = 1, Stream ID = MultiMedia9 (*)
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 36896
afe_find_cal: no matching cal_block found
send_afe_cal_type cal_block not found!!
msm_adsp_init_mixer_ctl_pp_event_queue: kctl_prtd is not NULL at initialization.
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 36913
afe_find_cal: no matching cal_block found
send_afe_cal_type cal_block not found!!
afe_open: port_id 0x100a rate 16000
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 4106
afe_open: port_id 0x100b rate 16000
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 4107
configfs-gadget gadget: unbind function 'diag'/ffffffc062d3c800
configfs-gadget 6a00000.dwc3: failed to start g1: -19
afe_open: port_id 0x100a rate 16000
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 4106
afe_open: port_id 0x100b rate 16000
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 4107
msm-pcm-loopback soc:qcom,msm-pcm-loopback: msm_pcm_open: Instance = 2, Stream ID = MultiMedia6 (*)
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 36913
afe_find_cal: no matching cal_block found
send_afe_cal_type cal_block not found!!
msm_pcm_routing_get_app_type_idx: App type not available, fallback to default
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 4099
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 36896
afe_find_cal: no matching cal_block found
send_afe_cal_type cal_block not found!!
msm-pcm-loopback soc:qcom,msm-pcm-loopback-low-latency: msm_pcm_open: Instance = 2, Stream ID = MultiMedia9 (*)
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 36913
afe_find_cal: no matching cal_block found
send_afe_cal_type cal_block not found!!
pil-q6v5-mss 2080000.qcom,mss: modem: Brought out of reset
msm_pcm_routing_get_app_type_idx: App type not available, fallback to default
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 36914
afe_find_cal: no matching cal_block found
send_afe_cal_type cal_block not found!!
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
IPC_RTR: ipc_router_mhi_xprt_probe: init failed
sde_smmu_probe: probe failed as mdata is not initialized
sde_smmu_probe: probe failed as mdata is not initialized
msm_pcm_routing_get_app_type_idx: App type not available, fallback to default
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 36913
afe_find_cal: no matching cal_block found
send_afe_cal_type cal_block not found!!
msm_pcm_routing_get_app_type_idx: App type not available, fallback to default
pil-q6v5-mss 2080000.qcom,mss: modem: Power/Clock ready interrupt received
pil-q6v5-mss 2080000.qcom,mss: Subsystem error monitoring/handling services are up
afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 36896
afe_find_cal: no matching cal_block found
send_afe_cal_type cal_block not found!!
hif_pci_notify_handler: Fail to send notify
IPA received MPSS AFTER_POWERUP
IPA AFTER_POWERUP handling is complete
rtac_add_adm_device, Can't add anymore RTAC devices!
R0: [modprobe][10:36:14.066769] wlan: [880:E :VOS] __ol_transfer_bin_file: transferring file: qwlan30.bin size 613389 bytes done!
+HTCCreate .. HIF :ffffffc06c815800
-HTCCreate (0xffffffc066fa5000)
R0: [modprobe][10:36:14.067142] wlan: [880:F :WDA] WMA --> wmi_unified_attach - success
ol_if_dfs_attach: called; ptr=ffffffc06dc05fa8, radar_info=ffffffc068f1b658
R0: [modprobe][10:36:14.067663] wlan: [880:E :SAP] dfs_init_radar_filters[217]: Unknown dfs domain 0
+HWT
pipe_num:0 pipe_info:0xffffffc06c815898
pipe_num:3 pipe_info:0xffffffc06c815a00
pipe_num:4 pipe_info:0xffffffc06c815a78
pipe_num:5 pipe_info:0xffffffc06c815af0
Target Ready! : transmit resources : 2 size:1792, MaxMsgsPerHTCBundle = 1
HTC Service Index : 1 TX : 0x100 : alloc:2
HTC Service:0x0001, ULpipe:0 DLpipe:1 id:0 Ready
-HWT
is_full_reorder_offloaded? 1
HTC Service TX : 0x300 : allocation is zero!
HTC Service:0x0300, ULpipe:4 DLpipe:1 id:1 Ready
HTC Service:0x0300 ep:1 TX flow control disabled
HTT: full reorder offload enabled
TXRX: page_divider 0x4, offset_filter 0xf num elem 2080, ol desc num page 130, ol desc per page 16HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready
R0: [modprobe][10:36:14.083206] wlan: [880:F :WDA] WMA --> wmi_unified_connect_htc_service - success
R0: [VosMCThread][10:36:14.083261] wlan: [1141:F :WDA] McThread: WNI_CFG_DNLD_REQ
HTC using TX credit flow control
__wmi_control_rx: WMI UNIFIED SERVICE AVAILABLE event
R0: [kworker/0:1][10:36:14.083731] wlan: [49:F :WDA] WMA